Practice service provider networking decisions with 120 original questions from Cloudpuz Academy. This course contains two different 60-question tests for learners preparing for Cisco 350-501 SPCOR. The topic plan follows the published v1.1 blueprint reviewed in November 2026. Scenarios ask you to interpret requirements, distinguish related technologies and choose the best explanation or next step under the stated conditions.

Each test contains nine Architecture, eighteen Networking, twelve MPLS and Segment Routing, twelve Services, and nine Automation and Assurance questions. This follows the five domain weights for balanced revision. The set is supplemental practice: it does not claim to assess every individual objective exhaustively or reproduce the format and difficulty of the live certification exam.

Architecture scenarios cover optical and Ethernet transport, radio access timing, virtualized infrastructure, IOS XE and IOS XR behavior, QoS tunneling models and bandwidth constraints. Security questions examine control-plane protection, TTL security, route security, FlowSpec scope, command authorization, source validation, destination blackholing and the boundary of MACsec link protection.

Networking questions explore IS-IS and OSPF adjacency, topology and path selection; BGP attributes, route reflection, address families, additional paths and convergence; and IOS XR route-policy behavior. Compare IPv6 transition methods, calculate carrier-grade NAT port-block capacity and BFD detection time, and reason about graceful restart, nonstop routing and link-bundle capacity.

MPLS and segment-routing practice covers label scope, stack overhead, null labels, LDP discovery and synchronization, OAM, labeled BGP, RSVP-TE constraints and local repair. Work through node and adjacency SID context, SRGB arithmetic, binding SIDs, shared physical risks, path-computation roles, Flex-Algorithm definitions, locator reachability and SRv6 packet-size planning.

Service scenarios distinguish route distinguishers and route targets, transport and VPN labels, selective shared-service routing, inter-AS options and carrier support. Review mVPN, EVPN route types and multihoming, Ethernet service relationships, VLAN stacking and rewrite, continuity monitoring, ring protection, multicast membership and RPF, shaping and congestion avoidance.

Automation questions address NETCONF transactions, locks and error handling; RESTCONF replacement behavior; YANG state data; NSO synchronization and ownership; Ansible batching; Terraform import; Secure ZTP; gNMI subscriptions; and telemetry transport. Assurance scenarios examine IPFIX template scope, sampled measurements, SNMPv3 protection and interface-counter calculations.

Every question has four options, one best answer, explanations for all options and a reference for further study. Each test allows 120 minutes with a 70 percent practice threshold chosen for learning, not an official Cisco pass score. Review all feedback after Test 1, revisit uncertain concepts and then attempt the different scenarios in Test 2.

This is a written practice-test course, without video lectures, a hosted lab or graded device exercises. Familiarity with IP routing and provider technologies is recommended. Cloudpuz Academy is independent and is not affiliated with or endorsed by Cisco. No real exam questions or passing guarantees are provided. Use official documentation and authorized lab practice alongside these questions, and verify current exam requirements before booking.